Selectline
Ready Go

The paint your season runs on.

Week after week, your pitches need clear white lines. Ready Go is made for that routine. A ready-to-use line marking paint for natural grass, with low consumption that helps you keep the season's paint costs under control.

No added water. No mixing. Just shake, fill and mark. Use low-flow nozzles to get more from every litre, with a manual marking machine or GPS robot. Supplied in white in a 10-litre can.

Clear lines
Low paint consumption
Ready to use, no mixing
Suitable for robots

WEEK IN, WEEK OUT

Mark, play, mow and mark again. From the first fixture to the last, keeping a pitch ready takes regular work. You need a paint that fits the routine and the budget.

Ready Go keeps preparation simple and consumption low. Shake, fill and get to work. With the right low-flow nozzle, you put down a clean white line using less paint. Less preparation, more pitches ready for play.

A groundsman marking a long white line across a grass pitch
Consistent

High quality, every round

Ready-to-use paint means the same consistency with every refill. A reliable starting point for clean, even white lines, whoever is marking.

Efficient

Make every litre count

Ready Go is highly efficient when used with a low-flow nozzle. Get more out of every can and keep your paint costs under control all season long.

No mixing

Straight to the pitch

No added water, no mixing. Just shake, fill and mark. Less preparation before every round.

Selectline line marking staying bright white on grass in sun, rain and frost
Rain, sun, frost. Same line.
The weather changes throughout the season. Your pitches still need clear, visible lines for the next training session or match. Ready Go is developed and tested for changing conditions on the pitch. Dependable white lines for your regular marking routine, with preparation and consumption kept simple.
A can of Selectline Ready Go on the grass beside a freshly marked white line
Look beyond the price of a can
The cost of marking a season depends on more than the price of a can. Paint consumption and preparation time count too. Ready Go combines low consumption with a ready-to-use formula. No measuring water or getting dilution right before each round. For clubs and municipalities marking regularly, that makes a difference across the season.
Specifications

Product type: Line marking paint, water-based, ready-to-use

Color: White

Pack size: 10-litre (r)HDPE container, 100% recyclable

Density: 1.17 g/ml

Suitable surface: Natural grass sports pitches.

Application conditions

Machines: Selectliner, Flexliner and Easyliner, or any machine with a pump delivering at least 3 bar (45 PSI) at the nozzle.

Preparation: Shake the container thoroughly for at least 10 seconds before use. Do not dilute or add water. Install the container directly in the machine.

Nozzle type: our advice, based on what the line has to do:

  • White nozzle, 0.22 L/min, for initial marking
  • Red nozzle, 0.14 L/min, for overmarking
  • Purple nozzle, 0.35 L/min, for a stadium finish

Conditions: Apply to dry, freshly mown natural grass at temperatures above 5°C. Do not apply immediately after rain or while the grass is wet from rain or dew. Avoid rainfall, frost, strong winds and intense direct sunlight during application. Ideally, allow several dry, rain-free hours after marking.

Drying time: Approximately 30 minutes under recommended conditions. Lower temperatures or damp conditions may extend the drying time.

Final whiteness and consumption: Both depend on nozzle selection, flow rate and marking speed.

Cleaning and storage

Cleaning: Clean the marking equipment immediately after use with clean water or Selectline Cleaner. Rinse the hoses, filters and nozzle thoroughly to prevent clogging.

Storage: Keep the container tightly sealed and store between 5°C and 30°C in a dry place. Protect from frost and direct sunlight.

Shelf life: 9 months unopened. Once opened, reseal the container tightly and store under the recommended conditions.

Safety: Water-based and non-flammable. Consult the safety data sheet before use.

Find the right combination

Machines and accessories for this paint

Why choose Selectline

We make it ourselves. For thirty years.

We develop every Selectline paint in our own labs in the Netherlands and France, and produce it in our own factories in the Netherlands, France and Germany. We test every batch before dispatch and keep a sample for reference. That helps us maintain the consistent quality you rely on, season after season.

Our team brings three decades of line marking experience, from professional stadiums to local club pitches. Tell us about your pitch, your equipment and the challenges you face. We’ll help you choose the right paint and settings, with practical advice for clear, even lines you can be proud of.

Selectline technician mixing a line marking paint sample in the Lumiforte laboratory
We're always nearby

Not sure which paint your pitch needs?

Frequently asked questions

How much paint does Ready Go use per pitch?

Consumption follows a simple calculation: nozzle flow rate x spraying time. Ready Go applies through Red, White or Purple hollow-cone nozzles delivering 0.14, 0.22 or 0.35 L/min, so a round that takes twenty minutes of actual spraying with the White nozzle uses about 4.4 litres. Time one round on your own pitch and you have a figure you can plan a whole season on, and one you can compare against a concentrate on litres plus hours, where the low-flow nozzles usually put Ready Go ahead.

Which of the three Ready Go nozzles should I choose?

Choose by task. Red (0.14 L/min) is the lowest-consumption option, suited to overmarking lines that are still visible and to narrow lines. White (0.22 L/min) is the general-purpose choice for routine club marking. Purple (0.35 L/min) lays down more paint per metre, for a first marking, worn or open grass, and wider lines.

Can I switch to Ready Go without changing my machine?

In most cases, yes. Ready Go needs a machine that reaches 3 bar / 45 PSI at the nozzle and accepts hollow-cone nozzles in the spray head. Check your pump's rated pressure first: below roughly 3 bar the spray fan does not form properly, whichever paint you use. If you are unsure, send us your machine type and we will confirm compatibility.

My lines look too thick. Should I dilute Ready Go with water?

No, never add water to a ready-to-use paint. Adjust the application instead: fit a lower-flow nozzle (White or Red), keep a steadier walking pace, or reduce the number of passes. Diluting Ready Go lowers the pigment concentration, which produces a greyer line and does not save paint.

How long does Ready Go keep in storage?

Shelf life is 9 months unopened, shorter than a Mix concentrate because Ready Go is supplied at application consistency. Store the container tightly sealed between 5°C and 30°C, in a dry place, protected from frost and direct sunlight. Frost damages the paint permanently, so an unheated shed in winter is not a suitable store. Reseal an opened container tightly and keep it under the same conditions.

Back to top
Line marking

News & Documentation

Looking for the latest line marking insights or technical documents for this product? You’ll find both here.

Contact us

Practical advice for your pitch

Questions about paint, machine settings or a line that didn’t turn out as expected? Tell us about your pitch and how you mark it. Our team will help you find a practical solution, whether you manage several pitches or mark your local club’s field.

Two Lumiforte colleagues talking with a customer at a table