Contact us
Contact us
cool-fx-asia-vignet

Cool-FX Asia 

A roof cooling coating made for climates where the heat is matched by the rain. It reflects solar radiation to keep barns, skylights and commercial buildings cooler, and is built to stay on the roof through the downpours that would wash a lighter coating away.   

More wear-resistant by design, it holds its cooling through the wet season and then clears naturally once the weather turns. 

Turns away heat
Wear-resistant
Simple to apply
Seasonal protection
Cuts cooling costs

Made for wet, tropical heat 

The problem with cooling a roof in a monsoon climate is not reflecting the sun. It is keeping the coating on the roof long enough to matter. Frequent, heavy rain strips ordinary seasonal coatings before the hottest months are through.

Cool-FX Asia is formulated to resist that wash-off, so the reflective layer stays intact through repeated downpours and keeps working across the full stretch of hot, wet weather rather than needing to be reapplied after every storm. 

 

brand-detail-cool-fx_02
7.3°C

Cooler inside 

In the Turkey trial, with no cooling running at the peak of the afternoon, the coated barn measured 7.3°C cooler inside than the uncoated control. That head start eases heat stress and reduces how hard the cooling system must work.  

14.7°C

Cooler surface  

During application, the coated roof measured 34.5°C against 49.2°C on the uncoated roof, a surface reduction of 14.7°C. Lower surface temperatures ease thermal stress on the roof and slow the transfer of heat into the building. 

12%

Lower energy use  

Across the full 42-day cycle, the uncoated control barn used 12% more electricity for cooling than the coated barn. For operators running fans and cooling pads through summer, that is a direct and repeatable saving. 

Coolfx bio 960x 1080
Field-tested in Turkey
Applied to poultry barns near Ankara, where a coated barn was measured against an uncoated control across a full 42-day cycle.
960x1080px
A specialist's choice
Avatix France, a building maintenance specialist, prefers Cool-FX to more permanent roof cooling coatings.
Built for rainy climates

What sets Cool-FX Asia apart is staying power. The formula is designed to bond and resist the wash-off that frequent, heavy rain causes, so it does not thin out after the first storms the way a lighter seasonal coating can. It still clears naturally at the end of the season, but through the wet months it stays where it is needed, on the roof and reflecting heat. 

Application & coverage

Mix with clean water and spray on in a single coat, with no priming or surface prep. A 20 kg bucket covers around 200 m² of roof surface. Apply in a dry window so the coating can bond before the next rain, and on sloping roofs use slightly less water so it stays put.

Suitable surfaces

 It works across the roof types most exposed to sun and rain: galvanised and metal barn roofs, the tar and gravel roofs found on warehouses and offices, and plastic skylights. If you are unsure how your surface will take the coating, our specialists can advise. 

Combine these with the TinyLineMarker Pro X

Go for optimal line marking

Selectline Mix Prof

Selectline Mix Prof

Our professional mix formula

Selectline Mix Prof
lumiforte-demo-product-04

Selectline Cleaner

Prolongs the lifetime of your machines

Selectline Cleaner
Selectliner

Selectliner

Professional line marking

Selectliner
Selectline Direct

Selectline Direct

Fill and apply, it's that easy

Selectline Direct
Marina

Need help finding the right product?

Hey, I'm Marina ready to help

Need help finding the right product?
Why Cool-FX

A coating matched to the climate   

Cooling a building well is a question of fit. A coating that performs in a dry Mediterranean summer is not necessarily the one that lasts through a tropical wet season. Cool-FX Asia exists because those conditions call for a more wear-resistant formula, one tested in the field rather than the lab.

Backed by Lumiforte, it brings proven reflective cooling to the regions where heat and rain arrive together, and where staying power matters as much as reflectivity.  

Pic2
We're always nearby

Ready to reduce heat?

Find a dealer

Frequently asked questions

What makes Cool-FX Asia different?

It is formulated for hot, high-rainfall climates, and the main difference is wear resistance. Built to withstand frequent heavy rain, it stays on the roof through the wet season, where a coating made for drier conditions would wash off sooner.

Will heavy rain wash it off?

Not readily. Cool-FX Asia is designed to resist the wash-off that repeated downpours cause, so it keeps reflecting heat through the wet months. Like any seasonal coating it clears eventually, but it is built to last through the rain, not disappear after it. 

How soon will I notice a difference?

Quickly. Once the coating is on and dry, the roof reflects sunlight straight away, so temperatures start coming down on the next hot day. 

Does it reduce glare as well as heat?

On skylights, yes. As well as heat, it reflects part of the incoming light, softening the harsh direct sun that reaches people working below, while still letting daylight through. 

Back to top
Cool-FX

News & Documentation

Looking for the latest insights or documentation of our automation products? We've got you covered.

More insights Product downloads
Contact us

Talk to a cooling specialist 

Every building holds heat differently. The right coating depends on your roof construction, the surface it's made of and how much cooling you need. Tell us about your building and a Cool-FX specialist will help you find the approach that suits it best. 

Get in touch with us
lumiforte-demo-contact-large