ReduClean

A cleaning agent that removes ReduSystems coatings from the greenhouse cover once they've reached the end of the season. It works on every removable coating except diffusion coatings. ReduClean can also be used on its own to clean a dirty greenhouse cover with buildup, restoring it to a clean, clear surface for optimal sunlight.

Suitable for any greenhouse cover, glass and all types of plastic. Mixed with water and sprayed on, then washed off naturally when rain is expected, or removed mechanically by brushing.

Removes Seasonal Coatings

Cleans Uncoated Covers

All Greenhouse Coverings

Rain or Brush Removal

Biodegradable Formula

Removes Coatings and Cleans Greenhouse Surfaces

ReduClean removes ReduSystems coatings once they've done their job, so the greenhouse cover is ready for the next season or a fresh application. It also works on its own to clear away dirt and buildup on a greenhouse with no coating, restoring maximum light transmission.

Diluted with water and sprayed evenly across the cover, ReduClean is typically applied just before a stretch of rain, so the rain washes it away over one or more showers. It can also be removed mechanically by brushing after soaking for at least 15 minutes, and its organic components are biodegradable, breaking down safely in low concentrations.

Diagram showing how ReduClean removes the coating so more light passes through

Drone spraying a coating over a greenhouse roof

Flexible application

Applied by drone, machine, helicopter or by hand, so growers can use the equipment they already have.

Worker on a greenhouse roof applying a coating with a machine

All greenhouse types

Suitable for glass, acrylate, polycarbonate and plastic film greenhouses, and effective across a wide range of crops depending on climate.

Dilute with water at a ratio of 1:5 to 1:7 and spray evenly across a dry greenhouse cover during dry weather, avoiding temperatures below 5°C.

For rain removal, apply when substantial rain is expected within about a week, so the rain washes the product away naturally.

For mechanical removal, let the product soak on the surface for at least 15 minutes before brushing off.

Each 20-litre can of ReduClean is diluted with water at a ratio of 1:5 to 1:7, depending on how much cleaning is needed. Growers use at least 250 litres of product per hectare (66 US gallons per 2.5 acres), which is about 12.5 cans per hectare (5 cans per acre). Mixed with water, this comes to between 1,500 and 2,000 litres of spray liquid per hectare (160 to 214 US gallons per acre).

For guidance on the right dose for your specific situation, reach out to a ReduSystems specialist.

ReduClean is suitable for any greenhouse cover, glass and all types of plastic, but for specially treated or factory-coated glass, check with your glass supplier first. On polycarbonate, acrylate or plastic film, rinse the surface after about 15 minutes, since rain alone may not fully remove the product from these materials.

Avoid applying near rooftop sprinklers, and isolate the water reservoir during application to prevent any change in pH.

Apply only to a dry surface in dry weather, and not below 5°C. ReduClean is a strong product, so protective gloves, clothing, and face and eye protection should be worn when handling it.

ReduSol

Adds shading against the summer sun. ReduClean removes it at the end of the season.

ReduHeat

Reduces heat while keeping grow-light in. ReduClean removes it at the end of the season.

ReduFlex Blue

Shifts light ratio for longer stems. ReduClean removes it at the end of the season.

ReduCompact

Shifts light ratio for compact growth. ReduClean removes it at the end of the season.

Why ReduSystems

The Right Solution for Every Season

Light is the most variable factor in greenhouse growing, yet many growers do not yet use it fully throughout the year. We help growers protect, improve and adjust crop performance in every season, with a solution matched to each stage of the growing cycle.

With decades of experience in light spectra, PAR and photosynthesis, we adapt every solution to the grower's crop, greenhouse and location. Our advice is based on science and real-world results, not guesswork.

Frequently asked questions

ReduClean is suitable for any greenhouse cover, glass and all types of plastic, including acrylate, polycarbonate and plastic film.

ReduClean removes ReduSol, ReduHeat, ReduFlex Blue and ReduCompact at the end of the season. Diffusion coatings need ReduClean for diffuse coatings instead.

ReduClean is diluted with water and sprayed evenly across the coated cover. Applied ahead of a stretch of rain, it's then washed away naturally, or it can be removed mechanically by brushing after a short soak.

Yes. ReduClean also works on its own to clear away dirt and buildup from an uncoated greenhouse cover, restoring maximum light transmission.

Both remove the same coatings and clean the same way. ReduClean Eco is an Ecocert-certified, non-ADR formula, a more sustainable option for growers who want it.

Apply to a dry surface in dry weather, above 5°C, and time it ahead of a forecasted stretch of rain so it washes off naturally.

Contact us

Talk to a ReduSystems Specialist

Every greenhouse faces different light and climate challenges, depending on the season, crop and greenhouse type. Choosing the right strategy can be difficult with so many factors to consider. Our specialists offer tailored advice based on your specific situation, helping you find the right solution for your crop, greenhouse and climate, all year round. Get in touch to discuss what works best for you.

Get in touch with us

Two colleagues talking at a table with a tablet

Our brands

ReduClean

Removes Coatings and Cleans Greenhouse Surfaces

Highly Concentrated

Removal Processes

Light Drives Yield

Works Well With ReduClean