ReduSystems | ReduClean DT

Removes Seasonal Coatings

Dosatron Dosing System

Low-Volume Application

All Greenhouse Coverings

Rain or Brush Removal

Removes Coatings Through Precise Dosatron Dosing

ReduClean DT removes ReduSystems coatings once they've done their job, so the greenhouse cover is ready for the next season or a fresh application. Dosed through a Dosatron pump, it uses less product than standard ReduClean, as little as 100 litres per hectare (26 US gallons per 2.5 acres).

The Dosatron pump doses ReduClean DT automatically, so every part of the cover gets the same correct amount without pre-mixing a tank. It is typically applied when rain is expected within about a week, so the rain washes the coating away.

Diagram showing how ReduClean DT removes the coating so more light passes through

Drone spraying a coating over a greenhouse roof

Flexible application

Applied by drone, machine, helicopter or by hand, so growers can use the equipment they already have.

Worker on a greenhouse roof applying a coating with a machine

All greenhouse types

Suitable for glass, acrylate, polycarbonate and plastic film greenhouses, and effective across a wide range of crops depending on climate.

Apply ReduClean DT evenly to a dry greenhouse surface using a Dosatron dosing pump, by spraying machine, manually or by helicopter, in temperatures between 5 and 20°C.

For rain removal, apply when a considerable amount of rain is expected within about a week, making sure the entire coating is moistened, so the rain washes it away naturally.

For mechanical removal, let it soak on the surface for at least 15 minutes before brushing off.

Each 20-litre can of ReduClean DT is dosed through a Dosatron pump into the spray line. For an optimal result, use at least 100 litres of product per hectare (26 US gallons per 2.5 acres).

For example, at 2,000 litres of spray liquid per hectare (530 US gallons per 2.5 acres), set the Dosatron to 5%. At 1,800 litres per hectare (475 US gallons per 2.5 acres), set it to 5.5%. For guidance on the right dose for your specific situation, reach out to a ReduSystems specialist.

ReduClean DT removes ReduSol, ReduHeat, ReduFlex Blue and ReduCompact. For ReduFuse and ReduFuse IR, use ReduClean for diffuse coatings instead.

Standard greenhouse cover materials are not affected, but for specially treated covers such as diffuse glass or AR coatings, check with your supplier first.

Avoid applying near rooftop sprinklers, and do not combine with other cleaning agents. Apply only to a dry surface, and not below 5°C or above 20°C. ReduClean DT is a strong product, so wear a safety mask, protective gloves and protective clothing when handling it.

ReduSol

Adds shading against the summer sun. ReduClean DT removes it at the end of the season.

ReduHeat

Reduces heat while keeping grow-light in. ReduClean DT removes it at the end of the season.

ReduFlex Blue

Shifts light ratio for longer stems. ReduClean DT removes it at the end of the season.

ReduCompact

Shifts light ratio for compact growth. ReduClean DT removes it at the end of the season.

Why ReduSystems

The Right Solution for Every Season

Light is the most variable factor in greenhouse growing, yet many growers do not yet use it fully throughout the year. We help growers protect, improve and adjust crop performance in every season, with a solution matched to each stage of the growing cycle.

With decades of experience in light spectra, PAR and photosynthesis, we adapt every solution to the grower's crop, greenhouse and location. Our advice is based on science and real-world results, not guesswork.

Frequently asked questions

ReduClean DT is suitable for any greenhouse cover, glass and all types of plastic, including acrylate, polycarbonate and plastic film.

ReduClean DT removes ReduSol, ReduHeat, ReduFlex Blue and ReduCompact. Diffusion coatings need ReduClean for diffuse coatings instead.

Dosed through a Dosatron pump, ReduClean DT is sprayed evenly across the coated cover. Applied just before rain is expected, it's then washed away naturally, or it can be removed mechanically by brushing after a short soak.

A Dosatron is a water-powered dosing pump that injects ReduClean DT into the irrigation or spray line at a precise, proportional rate as water flows through, so every part of the greenhouse receives a consistent, correct dose without needing to pre-mix a tank.

Both remove the same ReduSystems coatings. ReduClean DT is dosed automatically through a Dosatron pump at a lower volume, as little as 100 litres per hectare (26 US gallons per 2.5 acres) versus 250 litres per hectare (66 US gallons per 2.5 acres) for standard ReduClean.

Apply to a dry surface, in temperatures between 5 and 20°C, with wind speed below 2 m/s and relative humidity below 90%, and time it just before rain is expected so it washes off naturally.

Contact us

Talk to a ReduSystems Specialist

Every greenhouse faces different light and climate challenges, depending on the season, crop and greenhouse type. Choosing the right strategy can be difficult with so many factors to consider. Our specialists offer tailored advice based on your specific situation, helping you find the right solution for your crop, greenhouse and climate, all year round. Get in touch to discuss what works best for you.

Get in touch with us

Two colleagues talking at a table with a tablet

Our brands

ReduClean DT

Removes Coatings Through Precise Dosatron Dosing

Less Product Needed

Removal Processes

Light Drives Yield

Works Well With ReduClean DT