ReduClean for diffuse coatings

A cleaning agent that removes ReduSystems diffuse coatings from the greenhouse cover once they've reached the end of the season. It is formulated specifically for diffuse coatings, which regular ReduClean cannot remove.

Suitable for any greenhouse cover, glass and all types of plastic. Mixed with water and sprayed on, then washed off naturally when rain is expected, or removed mechanically by brushing.

Removes Diffuse Coatings

All Greenhouse Coverings

Rain or Brush Removal

Highly Concentrated

Biodegradable Formula

The Right Cleaner for Diffuse Coatings

ReduClean for diffuse coatings removes ReduSystems diffuse coatings once they've done their job, so the greenhouse cover is ready for the next season or a fresh application. Removing the coating before the winter months lets more natural sunlight reach the crop, when light levels are naturally at their lowest. Diffuse coatings need a different formulation than the standard shading and speciality coatings, which is why this dedicated version exists.

Diluted with water and sprayed evenly across the cover, ReduClean for diffuse coatings is typically applied just before a stretch of rain, washing away within about 2 days. It can also be removed mechanically by brushing after soaking for at least 15 minutes, and its organic components are biodegradable.

Diagram showing how ReduClean for diffuse coatings removes the coating so more light passes through

Drone spraying a coating over a greenhouse roof

Flexible application

Applied by drone, machine, helicopter or by hand, so growers can use the equipment they already have.

Worker on a greenhouse roof applying a coating with a machine

All greenhouse types

Suitable for glass, acrylate, polycarbonate and plastic film greenhouses, and effective across a wide range of crops depending on climate.

Dilute with water at a ratio of 1:5 to 1:7 and spray evenly across a dry greenhouse cover during dry weather, avoiding temperatures below 5°C.

For rain removal, apply when substantial rain is expected within about 2 days, so the rain washes the product away naturally.

For mechanical removal, let the product soak on the surface for at least 15 minutes before brushing off.

Each 20-litre can of ReduClean for diffuse coatings is diluted with water at a ratio of 1:5 to 1:7, depending on how much cleaning is needed.

Growers use at least 250 litres of product per hectare (66 US gallons per 2.5 acres), which is about 12.5 cans per hectare (5 cans per acre). Mixed with water, this comes to between 1,500 and 2,000 litres of spray liquid per hectare (160 to 214 US gallons per acre).

For guidance on the right dose for your specific situation, reach out to a ReduSystems specialist.

ReduClean for diffuse coatings is suitable for any greenhouse cover, glass and all types of plastic, but for specially treated or factory-coated glass, check with your glass supplier first.

On polycarbonate, acrylate or plastic film, rinse the surface after about 15 minutes, since rain alone may not fully remove the product from these materials.

Avoid applying near rooftop sprinklers, and isolate the water reservoir during application to prevent any change in pH.

Apply only to a dry surface in dry weather, and not below 5°C. ReduClean for diffuse coatings is a strong product, so protective gloves, clothing, and face and eye protection should be worn when handling it.

ReduFuse

Diffuses light evenly across the crop. ReduClean for diffuse coatings removes it at the end of the season.

ReduFuse IR

Diffuses light while also reducing heat. ReduClean for diffuse coatings removes it at the end of the season.

Why ReduSystems

The Right Solution for Every Season

Light is the most variable factor in greenhouse growing, yet many growers do not yet use it fully throughout the year. We help growers protect, improve and adjust crop performance in every season, with a solution matched to each stage of the growing cycle.

With decades of experience in light spectra, PAR and photosynthesis, we adapt every solution to the grower's crop, greenhouse and location. Our advice is based on science and real-world results, not guesswork.

Frequently asked questions

ReduClean for diffuse coatings is suitable for any greenhouse cover, glass and all types of plastic, including acrylate, polycarbonate and plastic film.

It removes ReduFuse and ReduFuse IR at the end of the season.

It's diluted with water and sprayed evenly across the coated cover. Applied ahead of a stretch of rain, it washes away within about 2 days, or it can be removed mechanically by brushing after a short soak.

ReduClean for diffuse coatings is formulated specifically to remove ReduFuse and ReduFuse IR, which regular ReduClean cannot remove. Regular ReduClean handles the standard shading and speciality coatings instead.

Apply to a dry surface in dry weather, above 5°C, and time it ahead of a forecasted stretch of rain so it washes off naturally within about 2 days.

At least 15 minutes before brushing, whether it's applied by machine or by hand.

Contact us

Talk to a ReduSystems Specialist

Every greenhouse faces different light and climate challenges, depending on the season, crop and greenhouse type. Choosing the right strategy can be difficult with so many factors to consider. Our specialists offer tailored advice based on your specific situation, helping you find the right solution for your crop, greenhouse and climate, all year round. Get in touch to discuss what works best for you.

Get in touch with us

Two colleagues talking at a table with a tablet

Our brands

ReduClean for diffuse coatings

The Right Cleaner for Diffuse Coatings

Highly Concentrated

Fast Rain Removal

Light Drives Yield

Works Well With ReduClean for diffuse coatings