AntiReflect  

A coating that reduces glass reflection on the outside of the greenhouse, letting more natural sunlight reach the crop. Unlike coatings that reduce or spread light, AntiReflect increases the amount of usable light entering the greenhouse, most valuable during the lower-light months of autumn, winter and spring. 

Suitable for glass greenhouses only, and effective for up to two years. Supplied ready-to-use, with no dilution needed before spraying, and keeps the greenhouse cover cleaner for longer. 

Reduces Glass Reflection
Effective for Two Years
Boosts Low-Light Seasons
Glass Greenhouses Only
Ready-to-Use, No Dilution

More Light, Lower Energy Costs 

Even the clearest glass reflects some sunlight before it reaches the crop. By reducing that reflection, AntiReflect lets more usable light into the greenhouse, boosting production and lowering energy costs, especially during autumn, winter and spring when natural light is already limited. 

AntiReflect stays on the glass for its full two-year lifespan. Other ReduSystems shading coatings can be applied on top of it each season, then removed again with ReduClean, without damaging the AntiReflect layer underneath. Do not combine AntiReflect with non-ReduSystems products, since different cleaning methods can cause problems when it's time to remove them.

Diagram showing how AntiReflect lets more light through the glass of a greenhouse roof
2.5-3%

More Light In 

By cutting glass reflection, AntiReflect lets 2.5 to 3% more sunlight reach the crop, most valuable in autumn, winter and spring.

2

Years of Effectiveness 

A properly applied coating stays effective for two years. Other ReduSystems coatings can still be applied and removed on top with no issues.

40+

Decades of R&D 

ReduSystems has been developing greenhouse coatings since 1986. That experience shapes every product, including AntiReflect. 

Drone spraying a coating over a greenhouse roof
Flexible application
Applied by drone, machine, helicopter or by hand, so growers can use the equipment they already have.
Worker on a greenhouse roof applying a coating with a machine
Built for Glass Greenhouses
Only suitable for glass greenhouses. Reduces glass reflection so more sunlight reaches the crop.
Application

Apply to the outside of the glass only, under fast-drying conditions, between 10°C and 20°C, with relative humidity below 80% and wind speed under 2 m/s. The greenhouse cover must be clean and dry, with the windows fully closed. Open shading screens at least one hour beforehand so the glass warms up. Do not apply if rain is expected within 24 hours. 

Coverage and Dosage

AntiReflect is supplied ready-to-use, so no dilution is needed. Apply 1,200 litres per hectare (127 US gallons per acre), plus about 100 litres (26 US gallons per acre) buffer for hose filling and other losses. Unlike a bucket-based coating, the dose is fixed rather than adjustable. 

Removal

If another ReduSystems coating has been layered on top, remove it first with the correct version of ReduClean. AntiReflect itself is removed separately, at the end of its two-year lifespan, with GS-4 or GS-4 Xtra, a double-concentrated version suited to heavier contamination. Do not dispose of the residue in an irrigation basin. 

Also Recommended

Works Well With AntiReflect

Why ReduSystems 

The Right Solution for Every Season

Light is the most variable factor in greenhouse growing, yet many growers do not yet use it fully throughout the year. We help growers protect, improve and adjust crop performance in every season, with a solution matched to each stage of the growing cycle.

With decades of experience in light spectra, PAR and photosynthesis, we adapt every solution to the grower's crop, greenhouse and location. Our advice is based on science and real-world results, not guesswork. 

Inside a glass greenhouse with plants under a bright roof
Available Worldwide

Ready to Protect Your Crop?

Frequently asked questions

Which greenhouse coverings is AntiReflect suitable for?

Glass only. 

How is AntiReflect removed at the end of its life?

If another ReduSystems coating has been layered on top, remove it first with the correct version of ReduClean. AntiReflect itself is then removed with GS-4 or GS-4 Xtra, a double-concentrated version for heavier contamination. 

Can AntiReflect be applied by drone?

Yes. It can be applied by drone, machine or by hand. Application methods can vary, so reach out to our team for specific instructions and support. 

How long does AntiReflect last on the greenhouse cover?

A properly applied coating stays effective for about two years before it needs to be removed and reapplied. 

Can AntiReflect be layered with other coatings?

Yes. Other ReduSystems shading coatings can be applied on top of it each season and removed again with ReduClean, without damaging the AntiReflect layer underneath. We advise against combining it with non-ReduSystems products, since different cleaning methods can cause problems when it's time to remove them. 

Does AntiReflect make the greenhouse harder to keep clean?

No, the opposite. The greenhouse cover actually stays cleaner with AntiReflect applied, and it can still be brushed with water up to 10 times a year for routine cleaning. 

Back to top
Keep Exploring

News & Documentation

Looking for the latest insights on greenhouse light and climate management? Explore our resources below. 

Contact us

Talk to a ReduSystems Specialist 

Every greenhouse faces different light and climate challenges, depending on the season, crop and greenhouse type. Choosing the right strategy can be difficult with so many factors to consider. Our specialists offer tailored advice based on your specific situation, helping you find the right solution for your crop, greenhouse and climate, all year round. Get in touch to discuss what works best for you.

Two colleagues talking at a table with a tablet